FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 48
Version 1.3 / December 2018
9.3.3 Change Setup
SETTING
DESCRIPTIoN
VALUE
Accept in ‘No change’
The selection of the vending machine receiving money
algorithm upon the occurrence of the NO CHANGE event
EVERYTHNING - receiving money without restrictions;
TUBES ONLY - receiving coins to empty tubes without
errors, as well as bills to the recycler (if it’s not overfilled
and
without errors) - without restrictions. Acceptance to
stacker
and cashbox of coins/bills, which denomination don’t ex
-
ceed
the amount specified in setting 3
Everythning /
Tubes only /
Smaller than
change
‘No change’ condition
The selection of the requirement of entering the NO
CHANGE condition
< 10 COINS IN ANY - if at least in one tube there are less
than 10 coins;
TOTAL < MAX. CHANGE - if it’s impossible (not enough
cash in tubes and recycler) to give out the maximum
change (see setting 3) or if in the minimum denomination
tube/recycler there are less than 3 coins/bills;
< 10 coin in any
total < max. change
Max Change
Defines the maximum amount of change, given out at a
time. The vending machine is not going to give out more
change than specified here. 0 - without restrictions
In some modes setting 3 impacts the detection of the NO
CHANGE condition (see setting 2). This setting is effec-
tive in the MDB mode only.
Input value
figure 30 -
Change Setup