FOODBOX TOUCH, FOODBOX LONG TOUCH, FOODBOX LIFT TOUCH
Page 37
Version 1.3 / December 2018
9.2 Snack
9.2.1 Service
bUTToN
DESCRIPTIoN
Selection Position
The tested cell number entry.
Lift Position
For the machine FoodBox Lift Touch programmable position of the lift
relative to the upper sensor in millimetres (“0” is the top position and the more
number, the below will be the lift, the centimetre is specified by value 10).
This value is important for all cells for those who are issued
with a lift and cells that are issued without a lift. In the first case, the position
of lift should be opposite the shelf and the second-the above product (to the
falling product does not touch the lift).
Use Lift
If the lift is installed in the machine, this setting must be in the position
Yes
.
For machines without the lift - in position
No
.
Set
Set-it is moving of lift in the installed option.
Test Motor
The motor turning in the specified cell.
Test All Motors
Turning all motors (Test all motors).
Lift To Top
(for foodbox Lift Touch only)
Lift movement to the uppermost position.
Lift To bottom
(for foodbox Lift Touch only)
Lift movement to the lowermost position, when it’s still not opening.
Lift To Position
(for foodbox Lift Touch only)
Lift movement to the tested cell.
open Lift
(for foodbox Lift Touch only)
Lift movement to the home position (when the lift is downwards and fully
opened).
Test Alarm
Turns on the siren for some time
figure 25 - Snack [Service]
