33
Version 1.0 / 11-2018
•
Insert the desired products in the spaces between the spirals up to the full
load, do not leave empty spaces.
•
When filling the spirals check that the products are not too tight in their
housing. If necessary replace the spiral with one that has a higher step.
•
The products shall not be forced into the spaces because the package
must fall by its own weight out of the spiral.
•
After the loading fit the shelves back into the vending machine up to the
fixed position.
•
Re-close the vending machine door.
6.4 product vending adjustments
Once you have decided upon the product you wish to vend, you need to
make the appropriate adjustments to the machine itself. The adjustments are
as follows:
•
Spirals
•
Spirals replacement
•
Number of spirals for each shelf
•
Setting of the drawers position
All operations described in this section are carried out with the vend-
ing machine disconnected from the mains!
Pull out the shelf and free it from any products.
Set the optimal position of spiral ends. For this pull out the spiral in accord-
ance with fig. 6.2, turn in through 45° or larger angle multiple of 45° and re-
lease.
45
0
figure 6.2
