5686G-PRO User Guide
Page
72
of
94
Copyright © 2018 USR, a Division of UNICOM Global
Result Code Meanings
Result Code
Meaning
0/OK
Command has been executed.
1/CONNECT
Connection with another device.
2/RING
Incoming ring detected.
3/NO CARRIER
Carrier Detect has failed, or carrier has been dropped due to disconnect.
4/ERROR
Command is invalid.
5/CONNECT 1200
Connection at reported rate. Same meaning for results of 2400 (10), 4800
(18), 7200 (20), 9600 (13), 12000 (21), 14400 (25), 16800 (43), 19200 (85),
21600 (91), 24000 (99), 26400 (103), 28800 (107), 31200 (151), 33600
(155), or 56000 (162) bps.
6/NO DIAL TONE
Dial tone not detected during the default 2 seconds, set in Register S6.
7/BUSY
Busy signal detect; modem hangs up.
8/NO ANSWER
After waiting 5 seconds for an answer, modem hangs up; returned instead
of NO CARRIER when the @ option is used.
11/RINGING
The modem has dialed; remote phone line is ringing.
12/VOICE
Voice answer at remote site; modem hangs up.
170/RING A
Incoming distinctive ring detected.
171/RING B
Incoming distinctive ring detected.
172/RING C
Incoming distinctive ring detected.
173/RING D
Incoming distinctive ring detected.
174/RING E
Incoming distinctive ring detected.
Wait for another Dial
Tone (W)
Courier Lite 56K Business Modem continues dialing as soon as it detects
another dial tone. Requires X3 or higher.
Wait for an answer (@)
Courier Lite 56K Business Modem continues dialing when it detects 5
seconds of silence on the line. Requires X3 or higher.
