background image

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your 
carrier claims agent and do not continue the installation until it has been reviewed. Please watch for 
pinch points. Do not put your fingers between moveable parts. Do not tamper with or disassemble any 
spring loaded parts. Before installing, make sure that the supporting surface will support five times the 
combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also 
layout all components to ensure that you have all of the required parts before proceeding (see BOM list 
on following page). Use of this product for anything other than its specified use may result in failure or 
personal injury. This product is intended for indoor use only. We recommend using a qualified trades 
person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: [email protected]

Revised 15/12/20

01865 767676

[email protected]

www.unicol.com

*Please check model specific details before installing*

KP KITS

Screen Size:

 33-70”

Guide Max. Weight:

 45-60kg

Summary of Contents for KP Kit

Page 1: ... the maximum load capacity Please also layout all components to ensure that you have all of the required parts before proceeding see BOM list on following page Use of this product for anything other than its specified use may result in failure or personal injury This product is intended for indoor use only We recommend using a qualified trades person for installation Use an assistant or lifting eq...

Page 2: ... 1 2 DESCRIPTION QTY 1 Length of Column 1m 2m or 3m 1 2 CP1 Standard Ceiling Plate 1 3 Single Sided Suspension Mount 1 4 Universal Tilting Mount Arms 2 5 Alternative Suspension Mount 6 Alternative Ceiling Plate TOOLS REQUIRED 1 Pozi Head Screwdriver 2 3 16th Allen Key 3 13mm Spanner 1 2 3 4 5 6 ...

Page 3: ...llation Please check surface is capable of supporting 5x the combined solutions weight STEP 2 Slide all cabling through the column and through the gap in the ceiling plate socket Being mindful of the cables slide the column into the socket ensuring that the two holes either side align with those on the mount Using the through bolt secure the column into place and tighten the two grub screws at the...

Page 4: ...cure the column into place and tighten the grub screws at the front of the socket Continue from Step 3 STEP 3 Using another team member lift the screen up and gradually offer it up to the back plate Gently tilting the screen forward hook the arms over the lip of the back plate and lower once in position Centre the screen horizontally by sliding from side to side until you are happy with the positi...

Reviews: