Quick Installation Guide
AHEP04A 4-Port VGA USB KVM Switch w/ Audio, Mic & Hub
http://www.uniclass.com.tw
Rev. 1.2 Copyright© All rights reserved
Quick Installation Guide
4-Port VGA USB KVM Switch
w/ Audio, Mic, & Hub
AHEP04A
Thank you for purchasing the AHEP04A VGA USB KVM Switch
w/Audio & Mic, & Hub! With our highly reliable and quality
product, user can enjoy countless benefits from using it.
INTRODUCTION
The AHEP04A is a 4-port compact desktop VGA USB KVM
switch with audio and microphone switching function.
With the True Transparent USB (TTU) Emulation Technology,
which embodies itself within a new ASIC chip, the AHEP04A
VGA USB KVM switch is capable of a complete versatility in
dealing with the functional requirements of all types of advanced
keyboards and mice. It also features advanced Active Sync
Replication (A.S.R.) technology which supports all-time DDC
emulation so that the video compatibility will be as constant and
stable as it should be, no matter how you switch.
In addition to connect to mouse and keyboard, USB 2.0 ports can
also be connected to other devices for Plug-and-Play. You can
enjoy maximum flexibility and convenience with its compact and
one-piece design.
INSTALLATION
Before you do the installation, please make sure that all the
equipment to be connected up is power OFF. Please follow the
steps below for installation.
1. Connect the shared USB keyboard, mouse, monitor,
speaker/headphone, and microphone to the corresponding port
on your KVM Switch.
2. Connect each KVM PC port to a computer.
3. Connect each of your USB device to the USB 2.0 device
ports. After these peripheral connections are made, the
installation is complete.
4. Open the power of the console device (monitor and so on).
5. You should then power on the KVM Switch by plugging in the
power adapter to the Power receptacle on the back panel.
6. Make sure PCs to be connected up is power ON.
Note: Some older computers with USB interface might need to manually
enable the USB option in the BIOS settings before you can use any USB
devices. If your USB interface does not work, please check the USB
option in the BIOS.
Note: If you use Windows 95/98/SE or Mac OS and have not yet
installed a USB mouse on your computer, there might be an error
message telling you that mouse is not detected and prompting you to
decide whether to ignore the same message in the future, and yet you
will find there is no mouse movement to disable this message….So it is
suggested that you should installed your USB mouse on your computer
first, before connecting it to this KVM Switch.
OPERATION
There are two methods to control your KVM Switch for PC and
Audio/Mic port selection: using (1) the front-panel button, and (2)
the Keyboard hotkey.
(1) Front-panel button
The front-panel button allows you a direct control over KVM
switching operation. Simply press the button to switch to the
other PC port (together with the hub port control and/or
audio/mic port, if binding is enabled). By default, PC port
switching, hub port control and audio/mic port switching are
bound together, unless you specify the audio to be fixed a
specific port.
(2) Keyboard hotkeys
For keyboard hotkeys, please refer to the
“Quick Reference
Sheet
”
