4
1
GENERAL INFORMATION
This document is the Technical Manual for installation, use
and maintenance.
The appliance is manufactured, tested and certified in
compliance with the Essential Safety Requirements
of Directive 2014/68/UE "P.E.D. – Pressure Equipment
Directive”.
ATTENTION!
The appliance must be operated within the
limits for which they were designed; any
other use must be considered improper and
therefore dangerous.
These design limits are given:
- on the data plate applied on the appliance;
ATTENTION!
This manual is an integral and essential part
of the supply and must be delivered to the
user.
In the event that the appliance is transferred in use or sold to
other Users (change of destination or move) make sure that
the appliance is transferred together with this installation, use
and maintenance manual so that it can be consulted by the
entrusted installer, the maintenance technician and the new
owner.
Installation, operation and maintenance must be carried
out in compliance with the regulations in force, following the
instructions described in this manual; also, any operation
must be carried out by professionally qualified and authorised
personnel.
ATTENTION!
Incorrect installation, inadequate use and
maintenance of the appliance can cause
damage to persons or property, for which
the MANUFACTURER is not liable.
CAREFULLY READ AND FOLLOW THE
INSTRUCTIONS CONTAINED IN THIS
MANUAL BEFORE CARRYING OUT ANY
OPERATION
ATTENTION!
THE APPLIANCE IS NOT DESIGNED TO
BE INSTALLED OUTDOORS, BUT MUST
BE LOCATED WITHIN THE APPROPRIATE PREMISES
(BOILER ROOM).
OUTDOOR OPERATION MAY LEAD TO DAMAGE, THUS
RESULTING IN SERIOUS DANGER CAUSED BY:
•
collapse/burst of framework aimed at the pressure
containment for embrittlement of the metal parts of the
framework making up the pressurised body;
• collapse/burst for failed operation/inhibition of the safety and
adjustment accessories;
• damage due to impairment of safety equipment/adjustment
due to the action of rainwater;
• minimum temperature not compatible with the minimum
allowable for the set/components, during the expected life;
• impairment of the IP protection of electrical parts not suitable
for operating the set outdoors under the action of atmospheric
agents.
1.1 - GENERAL WARNINGS
