10
Instructions for the installer
3.3 - PACKING
The storage tanks
SANICAL SC
are supplied completely as-
sembled.
After removal of the packing, make sure the ap-
pliance is complete and not damaged.
The packing elements (plastic strips, plastic
bags, etc.)
shall not be left to the reach of the
children, because they are possible sources
of danger.
The
Unical
declines any responsibility in the
case of damages procured to people, animals
or things produced by non-observance of the
instructions given in this manual.
In the packing, in addition to the appliance, there are:
- This instruction manual for the installation, use and mainte-
nance
- Guarantee certificate
3.4 - POSITIONING
In the choice of the installation place of the
appliance respect the following safety indica-
tions:
- Put the appliance in places in which it is pos-
sible to prevent the access from children, as
potential source of danger for their safety.
3.5 - PRELIMINARY CHECKS
ATTENTION!
Before connecting the storage tank to the heating system
proceed with an accurate cleaning of the pipelines with a
convenient product, in order to eliminate metallic residues
of workmanship and of welding, of oil and of fats that could
be present and that, coming up to the tank, could alter its
operation.
For the washing of the heating system do not to use sol-
vents, because its use could damage the system compo-
nents.
Thenon observance of the instructions of this manual can
cause damages to people, animals and goods, towards
which the Unical cannot be considered responsible.
- Put the appliance in places protected against the freezing.
- Verify the resistance of the supporting surface, taking into
consideration the weight of tank once full.
- Leave a distance of 500 mm around and on top of the tank in
order to facilitate the maintenance operations.
- It is suggested to install the tank as near to the boiler as
possible and to insulate the connection pipes in order to re-
duce the heat losses.