Unical HP OWER ONE 120, User'S And Installer'S Manual

Page: 17 / 44

17
The user is responsible of the proper disposal of this product, according to national regulations in the country of destination of the
appliance. For more information you should contact the installation company or local competent authority.
An incorrect decommissioning of the appliance may create serious environmental damage and endanger people’s
safety. Therefore, it’s recommended that the unit shall be disposed only by authorized persons and technical
training who have followed training courses recognized by the competent authorities.
It is required to follow the same precautions described in the previous paragraphs.
Pay special attention during the disposal operation of the refrigerant gas.
The illegal disposal of the product by the end user leads to the application of the penalties in accordance with the
law in the country where the disposal takes place.
The crossed bin symbol applied on the appliance indicates that the product, at the end of its useful life, must be
collected separately from other wastes, it must be collected separately from other solid/urban waste.
The units are produced in accordance with the EC directive on waste electrical/electronic equipment and the harmful
effects on incorrect disposal are shown in the user manual/installer. The manufacturer or its importer/distributor are
available to respond to any requests for additional information.
10.1 Residual risks
This paragraph reports any residual risks that cannot be eliminated during the design phase by the manufacturer.
Risk due to: Attentions / Corrections
Handling
The handling may always be at risk of falling or tipping the unit. Follow the instructions in the "Handling"
paragraph and all the precautions according to local regulations.
Installation
Improper installation may cause water leakages, gas leakages, electric shocks, risk of fire, malfunction or
damages to the unit. Installation should be done only by qualified technical personnel.
Place the unit in a suitable place and free from the risk of flammable gas leakages. Make the installation area
inaccessible to third parties.
Powder/water in
the electrical panel
Fix correctly the cover plate of the electrical panel. Any infiltrations may cause electric shocks and short
circuits which may cause damages to persons/things or to the unit itself.
Pay particular attention to the connection of the earthing circuit system.
Maintenance
During maintenance, which must always be carried out by authorized personnel, make sure that the
disconnecting switch is off and that nobody can accidentally change the disconnection of the device from
the unit by means of appropriate warnings and a suitable padlock
Fan motor
Contact with the fan motor can cause injury and/or death. Do not access the unit or remove the fan guards
while the fan motor is running.
Leakage of
refrigerant gas
Wear appropriate PPE as a gas leak could cause injury and intoxication. Carefully read the " REFRIGERANT
SAFETY DATA SHEET " given in the manual. Do not use heat sources near the circuit before having completely
discharged it.
Hydraulic leaks
They can cause damage to things and people and the risk of a short circuit. It is recommended to install shut-
off cocks.