Unic URW295CR, Maintenance Manual

Page: 19 / 125

８．３ Mode indicator blinking when it is in wrong operation.
８．４ Mode indication of each operation
Operation
Mode
indication
Operation
Fastest speed
mode
Raising boom
３８
Storing hook
Medium speed
mode
Lowering boom
３９
Mode select
Slow speed
mode
Hoisting-up ４０ Horn
２ interlocking
operation
Hoisting-down ００～０.０
Speed: 0～
100%
３ interlocking
operation
Retracting boom
４ interlocking
operation
Extending boom
５ interlocking
operation
Slewing C.W.
６ interlocking
operation
Slewing C.C.W
７ interlocking
operation
When wind-up switch of transmitter and radio control selector switch are pushed
at the same time,it is change to the operation display.
It returns to the state display when wind-up switch of transmitter and radio control
selector switch are pushed at the same time again.
（８－３）
The battery of the radio controller transmitter has decreased.
The emergency stop switch of the radio controller device is pushed.
The crane with the radio controller is operating it while checking the spool neutrality.
The "winding up hook" is operated in automatic stop for leaving minimam wire rope.
LED
display
３５
２６ ３６
２１
２２
２３
２５
Mode
indication
Mode
indication
２８
３０
３１
２４
２７
２０
３７
３２
３３
３４
Operation
It is operated to selector switch of shock-less function while operating the crane.
The manual operation is done at the radio controller mode.
Correspondence
The radio controller is operated at a manual mode.
1. The crane is operated at outrigger mode.
2. Outrigger is operated at the crane radio controller mode.
3. It is operated to switch of outrigger mode while operating the crane.
It is operated to switch of the low temperature operation mode while operating the crane.
Either one of operation such as"winding up hook","extending boom"is being carried out
while hook has hit against weight for over-winding alarm.
The hook storage switch was pushed while operating the crane.
It operates it by an automatic halt condition.