Unic Rumba, Notice Technique

Page: 7 / 125

- 7 -
6. PROGRAMING OF THE DIFFERENT COFFEE QUANTITIES IN THE CUP
P1 P2 P3 P4
P5
The keys from P1 à P4 can be programmed.
The multiple doses (1 , 2 ou 3 cups ) are calculated automatically from the programming of one
of them on each box.
1 Set the machine switch to Position 0.
2
Keep the key P5 pressed and put again the machine on.
Display of Pn then Pc and Pr by pressing several times the key P5
Pc = CALCULATED PROGRAMMING
Insert a filter-holder ( with coffee ) into the unit
Install cups
"
P5
Display Pc
"
P1 à P4 Select the dose to be programed (2c for example)
"
P5
Start the infusion cycle
"
P5
Press again to stop when the amount of coffee desired is correct.
Display of the corresponding digital value ( from 00 à 99 )
3
Repeat operation at 3 for the other doses ( 2C for example)
Pn = DIGITAL PROGRAMMING
Quick programming without coffee and/or values carried foward on other units.
"
P5
Display Pn
"
P1 à P4 Select the dose to be programed
"
P5
Dispaly of the digital value of the selected dose
"
P1
Increase the value
"
P4
Reduce the value
ε
P5
Memorize the new value
4
Repeat operation at 4 for the other doses
5
Pr = MANUAL PROGRAMMING
Same proceeding as in calculated programming Pc.
The manual programming doesn't calculate the other doses (1, 2 or 3 cups), only the
programed dose is modified.
Caution: any new programming ( Pn or Pc ) cancel ALL previous programed
values.
6
Wait until the program mode is automatically inactivated (from 10 to 15s), or switch
off and on again the machine.