32
♦
Reset to factory values
At the starting of the machine, when the boxes shows the version (example
«2.80») Press on the 3 keys (as shown opposite) until the display shows
«PRE».
Restart the machine to validate the values.
♦
4 doses box
1
Press 3 seconds on the key
to enter in programming mode
2
Menu
do
appears, press on the key
3
The sub-menu
PrG
appears, press on the key
(All keys blinking)
The keys
are programmable
Example with the key
:
4
Pack the ground coffee in the filter holder
Snap the filter holder on the group
Press the key
, to start de coffee cycle (volume shown in millimeter during cycle)
When the volume is correct, press again on the key
to stop the cycle
Repeat the same process for other doses
5
Once all the doses have been programmed, confirm the programming by pressing 3 seconds on
♦
Copy setting between coffee boxes
The programming is independent on the coffee boxes, it is possible to copy the dose settings from one box to
another, using the copy function
CPY
:
- After the programming doses on group 1, go to the sub-menu
CPY
, select
YES
to execute the copy of the
doses, then confirm by pressing the key
(all keys blinking).
- Go to another coffee box (ex: group 2) select the sub-menu Gr1 then select
YES
to confirm the transfer of
data to group 2, press the key
, all keys blinking to indicate the validation of the copy.
- To exit, press on the key of programming
during 3 seconds, on one of the groups of the machine.
Summary of Contents for AURA 2GR
Page 2: ......
