Unic AURA 2GR, Technical Note

Page: 31 / 37

31
♦
Dosamat box
SELF MAN
The dosamat box detects the number of cups when the filter holder is switched on, it is therefore imperative
to make the settings with the different cups (1 cup and 2 cups).
1
Press 3 seconds on the key
to enter in programming mode
2
Menu
do
appears, press on the key
3
The sub-menu
PrG
appears, press on the key (All keys blinking)
The keys are programmable
Example with the key and a filter holder 2 cups:
4
Pack the ground coffee in the filter holder
Snap the filter holder on the group
Press the key
, to start de coffee cycle (volume not shown)
When the volume is correct, press again on the key to stop the cycle
Repeat the same process for other doses (large volume & different filter holder)
5 Once all the doses have been programmed, confirm the programming by pressing 3 seconds on
►PROGRAMMING THE DIFFERENT VOLUMES OF COFFEE
♦
Electronic box
♦
Use
An impulse on the key and
activates the corresponding flow delivery.
During cycle, the display shows the remaining time in seconds.
To stop before the end of the delivery, press again the same key.
Note: a safety stops the flow after 105 seconds for the water and after 180 seconds for the steam.
♦
Programming
The electronic box enter automatically in programming (blinking keys), when we press 3 seconds on the
“programming key”
of coffee boxes.
The programming mode
Programming mode allows you to set the hot water and steam doses (time) :
- Place a container under the outlet and press the key to be adjusted.
- When the level in the container is correct press the same key again.
- Press on key
of coffee boxes, to confirm new settings and exit programming mode.