Unibloc-Pump UNIBLOC-PD Series, Operation & Service Manual

Page: 41 / 53

UNIBLOC-PD Operation & Service Manual: PD200-576 41
6.0 Pump Identification and Spare Parts
6.1 Pump Identification
Each pump has a unique serial number machined into the bearing housing. See detailed description under section 1.2. Each serial
number is linked to a unique build code, see example 1.0 below.
Example 1.0
Product Description
UNIBLOC
®
-PD 400 Size (B)
Stainless Pump Bearing Housing (A)
Standard Front Cover (C)
316 Stainless Rotor Housing (D)
1.5” T/C, Horizontal Mounting (E)
Class C 316L Stainless Rotors (F)
Standard Shafts, Drive Shaft in Top Position (G)
Single Mechanical Shaft Seal (SiC vs SiC) (H)
EPDM Elastomers (J)