USF-1600 User Manual
- page 22 -
a.
Enter the target value
«
Settings / Dispenser
»
menu allows configuration parameters for each dispenser.
▪
«
Target value
»
Specify the amount of seeds or granulated fertilizer to be sown per hectare
.
▪
«
Change value
»
Specify the percentage of change in the target value, by which you can manually
modify the setting when sowing seeds or granulated fertilizer. [
➙
24]
▪
«
Calibration factor
»
Specify the delivered dose of seeds or granulated fertilizer per each rotation of
the metering roller of the seeder.
1.
In the main menu, press the buttons:
>
> (
)
⇨
«
Settings / Dispenser
»
menu is displayed
2.
-
If you use multiple dispensers, select the one you want to configure.
⇨
You can find the selected dispenser by the number displayed at the top of the
menu.
3.
Configure the parameters.
Procedure
driving during technological paths
operation
Sowing on/off
Adjustment of the target value
Passage markers
Pre-filling of groove units
Access to other menus
Process paths
Desired dose per hectare
Working speed
Turbine speed
Percentage of temporary change in target value
