UNIA Plow B Series, Operating And Maintenance Manual

Page: 10 / 34

OPERATING AND MAINTENANCE MANUAL PLOW
- 8 -
curves!
•
The machine, as the part of the vehicle that protrudes outside the rear side outline of the
tractor covering the rear lamps of the tractor, poses a threat for other vehicles in the traffic.
•
When transporting the machine on highways, always use warning lights, distinguishing plate
and side reflectors.
•
Maximum width of the machine, which can be moved on highways is specified in the
detailed regulations of the country of use. They should be observed
1.5 Safety Symbols
A
Read through the Operating Manual thoroughly before operating the
machine
B
Stop the tractor engine and take away the ignition key before any
servicing and repair work
C Keep safe distance off the machine
D
Never reach into the crushing area as long as the components can
move
E Points of attaching hooks of the lifting equipment
F Speed limit sign
G
UWAGA
PROSIMY O REGULARNE SMAROWANIE PUNKTÓW
SMARNYCH
ATTENTION
PLEASE OIL REGULARLY LUBRICATION POINTS
UNDER THE OPERATING MANUAL
ACHTUNG
WIR BITTEN REGELMABIG DIE SCHMEIRSTELLEN
LAUT BEDIENUNGSANLEITUNG ZU SCHMIEREN
Lubricate the machine on regular basis
H
ACCORDING TO THE ROAD SAFETY REGULATIONS (REGULATION OF THE MINISTER OF
INFRASTRUCTURE OF 31/12/2002 - DZ. U. NO. 32 OF 2002, ITEM 262), DRIVE ON HIGHWAYS ONLY
AFTER HAVING OBTAINED AUTHORIZATION FROM THE COMPETENT HIGHWAYS
ADMINISTRATION BODY WHERE THE JOURNEY BEGINS.
For the machines that exceed the allowable transport width 3.0m