background image

WARNINGS

 

Please use the product properly as safety instructions to avoid injury or product damage.   

 

Please use the approved power cord appointed to the local country for this product.   

 

Static electricity will damage the instrument, so please test in the static-free area as far as 
possible.  Before  connecting  the  wire  to  instrument,  the  static  electricity  should  be 
discharged by temporary grounding the internal and external conductors.   

 

This  product  is  grounded  by  the  protective  grounding  wire  of  the  power  cord. If  you 
cannot  determine  whether  the  power  cord  is  connected  to  the  earth,  connect  the 
grounded terminal of metal enclosure to the earth through a wire. 

 

 

Never input voltage which exceeds the rated range into terminals of this product. 

 

Do not operate the instrument when the instrument cover is opened.   

 

Do not insert anything into the air vent, or damage may occur.   

 

Do  not  connect  the  power  cord  before  replacing  the  fuse  or  opening  the  shell  to  avoid 
electric shock. Make sure the cover is tightly screwed before using the instrument. 

 

Only  use  fuses  that  meet  the  model  and  rating  value  (T6.3AL,  250V  for  110V/120V, 
T3.15AL, 250V for 220V/230V).   

 

Never touch exposed joints and components after connecting the power supply.   

 

Please check the vents and fans regularly to ensure good ventilation is maintained during 
use. Poor ventilation will cause high temperature, which will lead to instrument damage.   

 

To avoid damage or injury, please do not use or store the meter in high temperature, high 
humidity, flammable, and explosive environments.   

 

To  avoid  dust  or  moisture  affecting  the  performance  of  the  instrument,  please  keep 
surface clean and dry. 

 

Do not expose the instrument to sunlight for long period.   

 

Clean  the  tester  casing  with  a  damp  cloth  and  mild  detergent.  Do  not  use  abrasives  or 
solvents!   

 

Do not operate the product if you suspect it is faulty, and please contact UNI-T authorized 
service  personnel  for  inspection.  Only  trained  personnel  can  perform  the  maintenance 
program.   

 

 
 

Safety Symbol   

 

On (Power) 

 

Off (Power) 

 

Alternating current 

 

Earth (ground) TERMINAL of Casing 

 

Earth (ground) TERMINAL 

 

Caution, possibility of electric shock 

 

Warning or Caution 

 

 

Summary of Contents for UDP3303C













Reviews: