9
•
Place the Solvent Pails inside the base cabinet and re-connect the Suction Pipe to the Drain
Valve by pressing the button and pushing up. Turn the handle to the open position (vertical).
•
Connect Solvent Transfer Hose to the hose barb of Wash Solvent Pail and secure with
Hose Clamp supplied.
•
Turn Handle of Drain Valve to open (vertical) position and close Cabinet Door.
GROUND WIRE INSTALLATION
Three ground wires are provided to discharge static electricity. To work properly, all three must be
installed correctly. Connect the ground wire at the back of the cabinet to an external grounded
object.On some models ground wires are already connected to the rinse pump and suction pipe.
On other models connect the two wires inside the cabinet to the pails, one to each.
OPERATION
PRE - CLEAN
• Disconnect the spray gun from the air hose. Pour paint from the cup (when present) into a 5
gallon pail (not supplied).
•
Rinse cup with solvent and pour into the same 5 gallon pail for later disposal or recycling.
MANUAL - UG4000-6000 UPP6500E and UP6000
REVISION 2014-09
