Visit us at www.unibondlighting.com
INSTALLATION MANUAL
E-530A / E-530AM
Wire Colour
Function
Connect To
Red
Black
Power
Ground
+12V to 110V DC (Power)
-
(Ground)
1.0
Pattern Selection
1. Unscrew Amber lens counter clockwise
2. Select desired pattern by pushing red button (see picture)
3. Re-install the lens
This Light comes with a Built-In Pattern Selection Switch
1.1
Flash Patterns
#1 - 8 Flash (SAE)
#2 - Single Flash (SAE)
#3 - Double Flash (SAE)
#4 - Triple Flash (SAE)
#5 - Quad Flash (SAE)
ON - OFF Switches
(ST100, sold seperately)
can be used Power (Red wire)
5 Amp Fuses
(sold seperately)
Wire from Power Source should be fused
Note: Cutting wires on E-530AM voids the warranty
This unit may not be factory-set to Flash Pattern #1
For E-530A only:
Switch #1
ST100
(ON/OFF)
From Vehicle Ground
Power
Ground
Battery Positive
Blac
k
Re
d
Last Updated: 03/21/2022
