Remove the mounting plate
Insert the hex bolt in place
USER MANUAL
Part No.
E-2111AC-M
Flash Patterns
WARNING:
It is not recommended to use magnetically mounted warning devices on outside of vehicle in motion.
Usage is at the sole risk and responsibility of the user.
NO.
Flash Patterns
1
2
3
4
5
6
7
8
9
10
11
6-Flash
Double Flash
Single Flash - SAE Class 1
Mega Flash
Rotating Flash (Quick)**
Alternating Left & Right Mega Flash
Alternating Left & Right Single Flash
Rotating Flash (Slow)**
Alternating Diagonal 6-Flash
Alternating Diagonal Double Flash
Random
Note : Disassembling lamp will void the warranty
DO NOT use a high pressure power washer to clean your E-2111AC-M, this may damage your E-2111AC-M and void
its warranty.
For more information, visit our website at: www.unibondlighting.com
ON/OFF Switch
Flash Pattern Button
- Once to the next pattern
- Three times in quick succession for
Flash Pattern NO. 1
Momentarily press the button
Flash Pattern button
ON/OFF button
Mounting (Single Bolt)
Remove the 4 screws on the
mounting plate in the centre
Step 1
Step 2
Insert the mounting plate on top
Mount in place with the 4 screws
Step 3
**Rotating Flash: switching between CW & CCW
Press [
Flash Pattern
] button 5 times in quick succession
Switch #1
ST307
(OFF-ON-Momentary ON)
Jumper Wires
From Battery Positive
Ground
Power
Pattern Selection
Battery Ground
Red
Brown
White
Suggested Switch Connection
(switches sold separately)
**Note: This info is only for hardwire option. User/Installer is
responsible for any damages done when deciding to remove
the cigarette adapter in order to expose individual wires.
Last Updated: 09/12/2023
Wire Colour
Function
Connect To
Red
White
Brown
Power
Ground
Pattern Selection
+12/24 VDC (Power)
-
(Ground)
+12/24 VDC (Power)
Light should be fused with 5 Amp Fuse (
ATM05 sold separately
)
Wiring Information
