ITEM NO.: T-2448
REVISED AUG 28, 2014
Printed in Vietnam
- 1 -
ASSEMBLY INSTRUCTIONS
Description Item No.
: MISSION GATHERING TABLE : T-2448
Page 1: ...ITEM NO T 2448 REVISED AUG 28 2014 Printed in Vietnam 1 ASSEMBLY INSTRUCTIONS Description Item No MISSION GATHERING TABLE T 2448 ...
Page 2: ...uch as a rug or carpet to avoid the parts from being scratched Remove all wrapping material including staples packing straps before you start to assemble DO NOT tighten all screws and bolts until completely assembled Keep all hardware parts out of reach of children WARNING Long exposure to rubber or soft plastic may cause a chemical reaction and damage the finish of your table Protect the surface ...
Page 3: ... with the packaging Before continuing please make sure you have all of the following hardware NO Description Qty Sketch NO Description Qty Sketch 1 Bolt M6x60mm 4 2 Barrel nut 6x13mm 4 3 Screw M4x35mm 10 4 Allen key 4x80mm 1 STEP 1 Attach Aprons C to Side frames B with bolts 1 nuts 2 as shown below Tighten with the Allen key 4 ...
Page 4: ...G 28 2014 Printed in Vietnam 4 STEP 2 Carefully place the unit from step 1 underneath the top A and attach with screws 3 as shown below Tighten with a screwdriver STEP 3 Attach Decoration parts D to side frames B as shown below ...
