Uneek 4x4 GU-RB-ASM5, Fitting Instructions Manual

Page: 11 / 20

Fit nut plate inside the chassis on both ends.
Note nut plate may look different. If a long
narrow tang is fitted on nut plate have this
sticking out of the chassis and break off tang
after fitting bumper.
Fit new bumper on to chassis with the help of
a friend and use M12 bolts provided to
secure. You may need to run a tap through
the chassis nuts that may be rusted over
time.
The RH side will lift up slightly after the tyre
carrier is fitted so you may need to space
leave the RH side a little lower at this stage to
compensate.