To arm entire system—both interior and perimeter
•
Close all windows and doors (the status screen will say
“
OF
”
-
if any numbers are
shown, those sensors will need to be closed)
•
Using App
—Press the Padlock/Home Icon on your App and select
“
Away Arm
”
from
the menu
•
Using Keyfob
—Press the Locked Padlock on your keyfob
•
Using Keypad
—Press and hold the
“
AWAY
”
Padlock for 2 seconds
•
On Umbra Legacy Panel
—Press and hold the
“
AWAY
”
Padlock for 2 seconds
•
The system will display
“
ON
”
and begin exit countdown
•
Exit premises before the delay expires
To disarm system when you return
•
When you enter through the door, the keypad will emit the entry delay tone
•
Using App
—Press the Padlock/Home icon on your App and select
“
Disarm
”
from the
menu
•
Using Proximity Card
—Present your proximity tag to the reader area of the panel
•
Using Keyfob
—Press the Unlock Padlock on your keyfob
•
Using Keypad
—Enter your 4 –digit user code followed by the
“
DISARM
”
Unlock icon,
or present your user proximity tag within the entry delay. (If the keypad is battery on-
ly—press and hold the * key for 2 seconds to activate proximity reader)
•
If you make an error, press the
“*”
key and try again.
•
The system will display
“
OF
”
when disarmed
To arm perimeter of building and still move freely inside
•
Close all windows and doors (the status screen will say
“
OF
”
-
if any numbers are
shown, those sensors will need to be closed)
•
Using App
—Press the Padlock/Home Icon on your App and select
“
Home Arm
”
from
the menu
•
Using Keyfob
—Press the Home Icon on your keyfob
•
Using Keypad
—Press and hold the
“
HOME
”
Icon for 2 seconds
•
On Umbra Legacy Panel
—Press and hold the
“
HOME
”
icon for 2 seconds
Umbra Legacy
User Quick guide
-
Brought to you by Umbrella Mesh Network
Umbrella Mesh Network, LLC
510 W. Amador Ave., Las Cruces, NM 88005
(855) 602
-
5276
