February 2022
C6057801-01
Installation
The following parts and accessories are included with the Qi-Series ultrasonic
bath:
•
1 x Basket
•
1 x Lid
•
1 x 2m length of drain hose
•
1 x Hose tail
•
1 x Ultraclean detergent sample
•
1 x Power cable
•
1 x Qi-Series quick guide
How to install:
Locate the Qi-Series close to a drain or sink to allow easy drainage of the tank.
Screw the hose tail connector into the drain valve
located on the rear of the unit.
Connect one end of the drain hose to the hose
connector and locate the other end over a drain
or sink.
Fill the bath with water and the correct dose of
detergent.
Connect the power lead into a suitable mains
socket.
Ensure that the mains plug, and switch are easily
accessible.
Once plugged in, switch on your Qi-Series bath via the
on/off switch at the rear of the unit.
The switch will then illuminate.
Your Qi-Series ultrasonic bath is now ready to use.
