Ultrasonix SonixTablet Service Manual Download Page 35

Page: 35 / 123

SonixTablet Service Manual

00.053.129, Revision C

Chapter 5: Software

5-1

CHAPTER 5: SOFTWARE

5.1

SOFTWARE UPDATES

Figure 5-1: Software Updates

5.1.1

Software Update via the Internet

To Update via the Internet:

Ensure the system has a live Internet connection.

Tap the touch screen

button.

Select

Administrator > Software Updates

The system will default to the

Update Location "Internet Update"

From the

Available Updates

drop-down menu, select the appropriate software version.

Select

Update

The system will automatically download the version specified and auto-install it.

When the installation is complete, the software will automatically reboot and apply the changes.

Note:

Consult with an Ultrasonix Technical Support Representative in order to determine which version to

install.

Note:

If an error occurs during installation, contact an Ultrasonix Technical Support Representative for further

instructions.

Summary of Contents for SonixTablet




























































































































Search results

Summary of Contents for SonixTablet

Reviews:

Related manuals for SonixTablet

Brands by name

Popular brands

Ultrasonix SonixTablet, Service Manual

Search results

Summary of Contents for SonixTablet

Reviews:

Related manuals for SonixTablet

Brands by name

Popular brands