CAMERA - BOTTOM
- 5 -
- 4 -
Installation of the KC7400CN camera must be performed
by qualified personnel in accordance with all local and
national electrical and mechanical codes.
Carefully remove the camera and its accessories from
the carton and verify that they were not damaged in
shipment.
The contents of the package include:
1. Lens connector plug (E4-191J-100)
2. Fuse(250V 2A) - The fuse must be replaced only by a
qualified service technician.
3. Lens mount cap - Attached.
4. C-mount adapter
5. L wrench
6. Operation manual
Note : The lens mount cap and C-mount adapter are
attached when supplied.
Field Installation - This installation should be made by a
qualified service person and should conform to all local
codes.
CONTENTS OF PACKAGE
SECTION 2:
INSTALLATION AND ADJUSTMENT
Mounting Hold - Used to install the camera on an
optional mount. The mount must be equipped with the
screw specified. The bracket can also be removed and
installed on top of the camera.
The supplied screw or equivalent (within 4mm)must be
used. If not, the bracket may not fit properly.
Camera fixing hole
Mounting Base
1.Remove the fixing
screw to remove the
mounting base.
2. Attach the mounting
base on the upper
plate of the camera
with the fixing screw.
KC7400CN
Tripod fixing screw
Tripod mounting base
Tripod fixing screw
KC7400CN
KC7400CN
27.5mm
32.5mm
14mm