5
F. If an auto-iris lens is used, connect the cable to the terminal
block for a video-type auto-iris lens. If using a DC iris lens,
use the mini-DIN connector supplied with the camera.
G. Route the coaxial cable from the monitor to the camera.
H. Plug the cable into the BNC output connector labeled "video
out" on the rear of the camera. The DAVE
TM
I/O is only used
in DAVE
TM
applications.
I. Plug the other end of the cable into the video input port on
the rear of the monitor.
J. Connect a two conductor power cable to the 24V ac input on
the rear of the camera.
K. Apply 24V ac power to the camera.
L. Adjust the lens focus and iris controls for an optimum picture.
