UltraGauge Screens
Gauge Screen
______________________________________________________________________________________
Page 27/83
UltraGauge
Blue
™
User Manual www.ultra-gauge.com
Navigate
Alarm Status
The UltraGauge Application continually compares real-time gauge values to each of the configured alarm values. If the
real-time value is greater than the high alarm or less than the low alarm, an alarm is initiated. The Alarm Status screen
will display all alarms which have triggered.
If no alarms are currently active, then the alarm indicator in the Gauge screen title
bar will indicate:
To the right is an example of a screen with active alarms. The first field indicates:
Alarm currently Active (currently outside the
min/max for this gauge) and has not been
suspended by the user.
Alarm currently Active (currently outside the
min/max for this gauge) and Suspended by
the user
Alarm suspended by the user, but not
currently active (not currently outside the
min/max for this gauge)
The remaining fields describe which Gauge caused the given alarm, the value
which triggered the alarm, and the Min/Max values configured for that alarm.
Clear all suspended alarms by selecting the
or
icon at the top of the screen. By doing this, all alarms will be
removed from this table, and the next time they exceed the configured Alarm Min/Max values, they will once again
cause an alarm to be triggered.
Navigate
Reset Trip Gauges
Allows quick access to set/reset any of the following:
Reset Trip Gauges
:
Resets all trip gauges including: Average fuel, fuel rate, average L/100km, average speed, distance, fuel cost,
fuel used, and run time.
Set Fuel Tank Filled Up
(Manual Mode/Auto-Fill Mode only)
:
If selected, informs UltraGauge that the tank has been completely filled. Once filled, UltraGauge assumes the
amount of fuel in the tank is equal to the fuel tank size. Once initiated, UltraGauge will then adjust the Fuel
Level, TTE and DTE gauges accordingly. This menu item is only necessary for vehicles not reporting a fuel
tank sensor. For vehicles with an OBDII available fuel tank sensor that is operating in auto-fill mode, tank fill
up is automatic and there should be no need to select this. However, Tank Filled Up can be used and will result
in the equivalent of an automatic tank fill up.
Set Fuel Cost
:
UltraGauge computes the cost of a General Trip, Trip, or Short Trip. It does this by multiplying the distance
traveled by the Fuel Cost which you set. As prices at the pump change, you can adjust this value to reflect the
current cost. This allows you to set Fuel Cost per Gallon or per Liter.
Navigate
Vehicle Information
From the Vehicle Information screen the name of the vehicle along with other detailed information is displayed.
