ULTRAFRYER Systems PAR-3-HE, Operating Instructions Manual

Page: 40 / 65

30A135
ITEM ACTION
RESPONSE
1
ENSURE the drain valve on the fryer is in the
CLOSED position, shortening is at the proper level, the
fryer TOGGLE ON/OFF switch is ON ; then depress the
ON/OFF key on the Ultrastat 11 Cooking Computer.
A. The
AMBER
Power Lamp beside the Fryer Toggle ON/OFF
Switch will LIGHT.
B.
CY P
will appear in the display indicating the computer is
in the PURGE MELT MODE.
C. Each time the computer turns the heat mechanism ON a “dot”
will appear in front of
. CY P
and the red indicator lamp
besides the fryer TOGGLE ON/OFF switch will LIGHT.
2
When shortening is heated depress the EXIT MELT key
on the computer.
A.
HEAt
will appear in the display indicating the computer is
in the FULL ON mode and has turned the BURNER ON
until SETPOINT temperature is reached.
3
When
droP
appears in the display indicating short-
ening is at the SETPOINT temperature:
1- Drop the product to be cooked
2- Depress either the
1
%
or 2
& key
to start the cook cycle.
A.
3.00
will appear in the display indicating the product cook
time and will immediately start counting DOWN.
B. The lamp above
1
%
/ 2
&
will BLINK to indicate that
the timer is in use.
C. Each time the computer turns the burner
ON , a “dot” will
appear before the time and the RED indicator lamp besides
the fryer TOGGLE ON/OFF switch will LIGHT.
4
When the time displayed counts down to
0:00
the
alarm will be turned ON to alert the cook that the
cook cycyle is ended. At this time:
1 - Remove the product from the shortening
2 - Depress the
1
%
or 2
&
key to turn the alarm
OFF and reset the timer.
A.
droP
will appear in the display to indicate that the timer is
ready for another cook cycle.
5 Repeat steps 2,3 and 4 to start additional cook cycles.
NOTES: 1 - To display the ACTUAL shortening temperature, depress the TEMP key ONE (1) time.
2 - To display the SETPOINT temperature, depress the TEMP key TWO (2) times.
3 - To display the TIME remaining in a cook cycle, depress the TEMP key THREE (3) times.
4 - Steps 1, 2, 3 and 4 will have to be repeated each time any of the following occurs:
DRAIN VALVE IS OPENED
FRYER TOGGLE ON/OFF SWITCH IS TURNED OFF TO FILTER SHORTENING OR BOILOUT A FRYER
FRYER TOGGLE ON/OFF SWITCH IS TURNED OFF AT CLOSING
NOTE: For more detailed information on the Ultrastat 11 Cooking Computer including how to program the computer
refer to the Ultrastat 11 Cooking Computer Operating Instructinons PN 30A053 provided with the fryer.
F. ULTRASTAT 11 COOKING COMPUTER OPERATION
NOTE: Ultrastat 11 Cooking Computers will be prorammed by Ultrafryer Systems for cooking products at 350ºF (177ºC) for
3 minutes.
Page 36 of 61