Ultraflux Uf 811, User Manual, Page: 42 / 104

42
NT UF 811 CP GB (e) / June 2015
5.4 SIMPLE configuration
Below you will find the description of the menus, screen by screen, to guide you through the configuration of
your flow meter.
5.4.1 "Configuration" Menu
1) "Config. Files" Window
This window lets you load and save your configurations. The current configuration of the flow meter can be
saved directly in the flow meter, or on a PC. Up to 11 configurations can be saved, numbered from 1 to 11.
To save the current configuration on the flow meter, select the configuration number under which you wish
to save it. The saving of the configuration is then confirmed when passing to another menu page or
following an extended press of the Fn key. The name of the configuration is the same as the station name
(see point 8).
To recall a configuration, enter the configuration number and confirm this choice by passing to another
menu page.
Remember to save the current configuration in order not to lose it.
2) Reinitialisation
This command reinitialises the flow meter
(to factory configuration).
3) Confirmation (of reinitialisation)
Reinitialisation of the flow meter requires the user to enter a field requiring confirmation (protection against
handling errors).