Install the second PEG, then level
and tightly secure the PEG set.
Repeat for all PEG sets. Use wood
screws if studs are encounterd.
Adjust PEGs into the collets.
Repeat this step to install the
additional PEG+ sets.
ULTRA PEG+ INSTALLATION GUIDE
Important! Before installing Pegs do the following:
1. Check the Package Contents for missing or damaged items
Contact Customer Service at 1-800-611-8644 for questions or concerns
Recommended Fastner Applications:
Drywall anchors (included)
- Use for installing rails to drywall if studs are not present in
the desired location. Do not use drywall anchors to secure into a wall stud location.
Wood Screws (included)
- Use wood screw to secure collars to wall studs or wood
panels, do not use on drywall without securing to a stud. Concrete or Masonry
applications not recommended.
Concrete, Brick or Stucco (Not Included)
- 3/16” x 1-1/4” Masonry Screw
or #8x1-1/4” screw with the proper concrete anchors.
Package Contents
Recommended Installation Tools
(Not Included)
2x pegs 2x Wood Screws
2x Drywall Anchors
2x Collets
Power Drill
Power Bit
Level
Pencil
Screwdriver
Tape Measure
Stud Finder
STEP
09
STEP
11
STEP
12
STEP
10
