Page 4 of 12
Intended Use
The Ultra-Tow 7In., 2-Channel Backup Camera includes a crystal-clear 7'' LCD monitor
. It’s the
perfect addition for any driver who needs assistance backing up
. It’s also an LCD monitor which is
very light, as well as thin. It has two video inputs allowing for an additional camera to the system
(additional camera not included).
The truck rear view camera has a 120° viewable angle, is water-resistant, and has auto-night vision.
The camera is one of the most durable, with incredible adjustability and night vision clarity. The RV
box camera has a metal sun shield visor to protect from glare and debris. It can be used in cars, vans,
buses, and even industrial sized trucks. This camera can take a direct hit from a rock and still work
like new.
Packaging Contents
7 Inch Monitor (1)
Backup Camera (1)
20m Video Cable (1)
Monitor Power Cable (1)
Monitor Bracket (1)
Remote (1)
Owner’s Manual (1)
Technical Specifications
Property
Specification
Power Source
12-24 Volt DC
Monitor Dimension (inches)
6.85 x 5.2 x 1.1
Viewing Angel
120°
Video Formats Available
PAL / AUTO / NTSC
Digital Screen Resolution
800 x 480 Pixels
Night Vision Distance
50FT Max
Operating Temperature
-10°C~+65°C , RH90
%
MAX
Storage Temperature
-30°C ~+ 80°C RH90%
Important Safety Information
⚠
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this tool. Always be
aware of the environment and ensure that the tool is used in a safe and responsible manner.
Do not allow persons to operate or assemble the product until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this product in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the product
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work it is not