You can also choose permanent mount,
refer to the following description:
•
Insert M6x15 Hex socket cap screw (7) to spring washer (6), flat washer (5),
bracket (2) and the side of light (1). Do not over tighten the screws.
•
Insert M6x15 Hex socket cap screw (7) to spring washer (6), flat washer (5),
cambered hole on bracket and the side of light (1). Do not over tighten the screws.
•
Adjust the angle of the light body that will give you a maximum beam, and then
tighten M6x15 Hex socket cap screws.
•
Select a mounting location that will not cause any obstruction for your vehicle’s
normal functions.
•
Drill a mounting hole for M8x30 Hexagon Bolt (9) on the mounting surface. Insert
M8x30 hexagon bolt (9) to the hole of bracket (2) and mounting hole on your
vehicle. Then attach the M8 spring washer (10), M8 flat washer (11) and M8
hexagon nut (12). Do not overtighten the screws.
OPERATION
1. Plug the 12V DC power port plug into the 12V power port of vehicle, making sure you
have a good connection.
2. Pressing the button on the power port plug, the lightbar will be lighted.
3. To turn off the lamp, just press again.
MAINTENANCE
•
It is recommended that the general condition of the lightbar be examined before it
is used. Keep your lightbar in good repair by adopting a program of conscientious
repair and maintenance. Have necessary repairs made by qualified service
personnel.
•
Clean the surface of lightbar lens frequently to keep its brightness.
•
When any malfunction occurs, stop using and repair it immediately as soon as
possible. Please operate your lightbar according to the proper operation
procedures.
