WARNING
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
WARNING: If the surface is cracked, switch off the appliance to avoid the possibility
of electric shock.
For
indoor
use
only
.
SPECIFICATIONS
The UP1200W power supply is guaranteed to be free from defects in materials or workmanship for
period of one year from the original date of purchase (verified by dated, itemized
sales
receipt
).
Warranty
does
not
cover
incorrect
AC
voltage
input
,
damage
to
case
or
exposed circuit boards,
disassembling case, tampering with internal electronics, allowing water, moisture, or any other foreign
material to enter this Power Supply or get onto the PC board, incorrect
wiring
of
output
,
allowing
exposed
wiring to short circuit, or any damage caused by crash, flooding, or act of God. Because
Ultra Power has no control over the connection & use of the power supply, no liability may be
assumed nor will be accepted for any damage resulting from the use of this product. Every power
supply is thoroughly tested & burn-in before leaving our factory and is, therefore, considered
operational. By the act of operating power supply, user accepts all resulting liability. In no case shall
our liability exceed the product’s original cost. We reserve the right to modify warranty provisions
without notice.
Moving
your
power
supply
away
from
the receiver
.
Connecting
your
power
supply
to
an
outlet
that is
on
a
different
electrical
circuit
from
the receiver
.
Contacting
a
qualified
service
technician
for help
.
Try
to
eliminate
the
interference
by
:
Total Output Power:1200W
Voltage: 100-120V AC or 220-240V AC
Input AC Frequency: 50-60Hz
Output Voltage Adjustable: 15-24V DC
Output Current: Max. 60A
Current Overload Protection:
≤
61A 500MS
Input Fuse: 20A Fuse
USB Power: 5V, 2.1A
Output Voltage Ripple: <300MV
Specifications
are
typical
;
individual
units
might
vary
.
Specifications
are
subject
to change
and
improvement
without
notice
.
Over Temperature protection: <65
℃
Cooling Method: Cooling Fan
Operating Temperature: 0-40
℃
Operating Humidity: 0-90%
LCD Display: Voltage Precision ±0.3V
Current Precision ±0.5A
Percentage
Dimensions: 292.9x139.4x75.7mm
Weight: 2.4kg
WARRANTY
Manufactured by
Ultra Power Technology Limited
www.ultrapower.hk
E-mail: [email protected]
To use the power supply after you connect the device
to
it
,
set
POWER
to
turn
it
on
with
the power switch.
If
the
power
supply
'
s
LCD
does
not light
,
check
all
connections
and
confirm
the wall
AC outlet
has
power
.
If
the
outlet
has
power
,
set
POWER
to
OFF
,
reduce
the
load
(
by
using
a
device
that
does not
require
more
than
60
amps
),
then
set POWER
to
ON
.
Your
power
supply
'
s
overload protection
circuit automatically
shuts
down
the power
supply
when
it
is
overload
and
resets
by turning
POWER
to
OFF
.
Caution
:
Place
your
power
supply
in
a
well ventilated
open
and
cool
area
.
Do
not
block
the openings
at
the
fan
suction
on
the
side
and
the discharge
openings
on
the
other
side
.
Caution
:
To
reduce
the
risk
of
energy
hazard
,
be
careful
not
to
short
the
output
terminal during operation
.
Remove
the
output connections
after
use
.
Caution
:
Your
power
supply
might
cause
TV
or radio
interference
even
when
it
is
operating properly
.
To
determine
whether
your
power supply
is
causing
the
interference
,
turn
off
your power
supply
.
If
the
interference
goes
away
,
your
power
supply
is
causing
it
.
OPERATION
