HyperSpike
®
LineWave Installation and Maintenance Manual
Copyright © Ultra Electronics
– USSI, Columbia City, IN 46725 USA
90243A-MAN-LINEWAVE Rev C
Page 9
2.6. 72544B-802
– Wall Mounting Kit Installation:
Reference the following instructions to install a LineWave 90243A-801 or 90243A-802 on a
wall surface:
1. Fasten L Bracket (Part B) to the wall surface using appropriate fasteners for the wall,
according to local codes and safety practices.
Wall fasteners are not included in the mounting
kit.
2. Insert two T-Nuts (Part H) into the slot on the back of the LineWave and attach Pivot Nub
(Part A) using two
1” long screws (Part J).
3. Mount the LineWave by connecting Pivot Nub to L Bracket using flat washer (Part D) and 5/8
long screw (Part G).
4. To aim the speaker left or right, loosen the 5/8 long screw (Part G) and pivot the unit to the
desired position. Once the speaker is in the appropriate position, re-tighten screw.
Figure 7. 90243A-801 and 90243A-802 Wall Mounting
