Ultimate V3 Mount
Assembly/use Instructions
Thank you for purchasing the Ultimate V3 Mount. I hope you will enjoy it knowing the bayonet will not affect harmonics
of your barrel. There are two different length brackets available to cover as many firearms as possible. The brackets will
mount on any picatinny rail with at least two slot sections available.
Please carefully read and understand the following assembly/use instructions. Failure to follow these and the V3 mfg
directions can result in damage to your bayonet due to bullet strikes.
NOTE:
You must confirm your firearm is unloaded (mag removed, chamber empty, bolt open/removed), prior to starting
the assembly/mounting process.
What comes in the package:
1.
Fully assembled bracket (including screws), ready for mounting to your V3 Chronograph bayonet and picatinny
rail section.
2.
Instruction sheet.
Assembly:
1.
Find and remove the 2- #10-
24 screws from the “bracket head”.
2.
Remove all original parts used to mount your V3 bayonet.
3.
Place the V3 base on the bracket head and replace the screws. Note: feel free to use a small amount of blue
Loctite on the screws. Tighten screws to 20 Inch# Max.
