UAMM 12 A1
31
2. To switch the device off before the
30 minutes has expired, press the OFF
button
4
.
6.2 Selecting a programme
There are 8 programmes (MODE 1 – 8)
available altogether. The programmes vary
in their intensity, the area massaged and the
massage rhythm.
1. Press the MODE programme button
5
.
The illumination of the remote control
will be activated.
2. Press the MODE programme button
5
again.
The device switches to the next
programme and the motors start to
work.
The selected programme number is
shown in the LCD display
3
.
6.3 Switching the heater on and off
1. Press the heat button
7
.
The illumination of the remote control
will be activated.
2. Switch the heater on by pressing the
heat button
7
again.
Heat will now be produced from inside
the massage mat.
3. To switch the heater off, press the heat
button
7
again.
7. Cleaning and maintenance
7.1 Cleaning the device
To ensure your product gives you lasting
service, you should clean it regularly.
Warning!
To avoid the danger of
an electric shock or damage:
– Always disconnect the power
supply before cleaning.
– Never immerse the machine in
water.
– Never allow water or cleaning
agent to run into the machine.
Caution!
Never use caustic or abrasive
cleaning agents, as they could damage the
parts.
1. Unplug the power plug
11
from the
power socket
10
.
2. Clean the massage mat
1
with a clothes
brush.
3. If badly soiled, clean the massage mat
1
as well as the remote control
9
with a
damp cloth. You could also use a little
mild washing-up liquid.
4. Wipe off with clean water.
5. Do not use the device again until it is
fully dry.
7.2 Changing the fuse in the car lead
There is a fuse in the car lead
12
to protect
the car’s electrical system. If there is no
power supply and the car lead
12
stops
working, you should check and, if
applicable, change this fuse.
RP77422 Automass LB5 Seite 31 Donnerstag, 30. August 2012 4:27 16
