For internal use only
Ultimaker S5 Material Station
Decoupler calibration instructions
Page 1: ...For internal use only Ultimaker S5 Material Station Decoupler calibration instructions...
Page 2: ...is starts the calibration of decoupler 1 or Note The Material Station can be powered on and connected to an Ultimaker S5 when starting this procedure Note For the next steps keep holding the eject but...
Page 3: ...u have pressed the eject button Note It does not matter which of the eject buttons you press to confirm each step Note The Material Station will flash two times 5 Pull the slider up but do not compres...
