Step 2: Mounting the limit switches
Assembling the frame
12
image 3:
placing the ball bearings into the panel
6.1.2.
Step 2: Mounting the limit switches
Warning!
Do not strain the tapped thread on the inside of the switch
housing by putting a lot of force on the bolts. All limit switches are
pre-tapped, you can fasten them directly with M3 bolts, no nuts
required here!
Caution!
Note that all wires of limit switches need to be twisted,
/!!Ƭ%)#!ąċ
The following parts are needed in this step.
Letter Description
Qnty.
A
FRONT panel
1
B
LEFT panel
1
C
BACK panel
1
D
RED wired limit switch
1
E
BLUE wired limit switche
1
F
BLACK wired limit switch
1
G
bolts M3 x 12mm
4
H
bolts M3 x 16mm
2
I
washers
2
