Instruc
tions manual - English - EN
9
HOV HI-POE IPM AVAILABLE MODELS AND FEATURES
Operating
temperature
Injector
Camera
Demisting
system
Illuminator
Heating
De-icing hea-
ted glass
Fan with
double air
filter
-10°C / +60°C
(14°F / 140°F)
PoE classe 3
(13W)
PoE max. class
2 (7W)
p
–
–
–
p
Hi-PoE class 4
(25W)
PoE max. class
3 (13W)
p
p
–
–
p
-10°C / +50°C
(14°F / 122 F°)
PoE classe 3
(13W)
PoE max. class
2 (7W)
p
–
–
–
–
Hi-PoE class 4
(25W)
PoE max. class
3 (13W)
p
p
–
–
–
-30°C / +50°C
(-22°F /
+122°F)
Hi-PoE class 4
(25W)
PoE max. class
3 (13W)
p
–
p
–
–
Hi-PoE class 4
(25W)
PoE max. class
3 (13W)
p
–
p
p
–
Tab.
3
8 Switching on
The automatic pre-heating (de-ice) process
could be started whenever the device is
switched on and the air temperature is
below 0°C. This process is used to ensure
that the device works properly even at
low temperatures. The duration ranges
between 60 and 120 minutes, depending
on conditions.
During the lighting phase the device reads the
status of the dip switch and automatically detects
all the connected options for the correct energy
management of the housing.
The 6 LEDs shown in the figure allow to check the
product's operating status.
Fig.
17
Refer to the table to identify the operating status.
