UI NanoSwitch, Quick Start Manual

Page: 1 / 15

NanoSwitch Self­Tapping Screw Metal Straps (Qty. 2)
Package Contents
Installation Requirements
Mounting accessories and drain wire are not included.
Pole­Mounting
Drill with a 4.5 mm Drill Bit
7 mm Socket Wrench or Screwdriver
Wall­Mounting
(2) Screws (≤ 5 mm Screw Head)
(1) Drain Wire, Optional (≤ 12 AWG, ≤ 1 m)
Cables
Shielded Category 5 (or above) cabling with drain wire should be used for all
wired Ethernet connections and should be grounded through the AC ground of
the PoE.
We recommend that you protect your networks from harmful outdoor
environments and destructive ESD events with industrial­grade, shielded
Ethernet cable from Ubiquiti. For more details, visit:
ui.com/toughcable
Surge protection should be used for all outdoor installations. We recommend
that you use two Ethernet Surge Protectors, model ETH­SP­G2, one near the
N­SW and the other at the entry point to the building. The ETH­SP­G2 will
absorb power surges and safely discharge them into the ground.
N­SW Quick Start Guide