UHP-1100 SATELLITE ROUTER BOARD
GENERAL DESCRIPTION AND INSTALLATION GUIDE, v3.2
© UHP Networks Inc. 2015
7
www.uhp.net
1.
GENERAL DESCRIPTION
1.1
System overview
UHP satellite routers are essentially a universal solution for geographically distributed VSAT-class satellite
communication networks. UHP routers can be used to organize simple point-to-point channels, “star”- and
“mesh”-topology networks with several hierarchy levels and bandwidth-on-demand capabilities.
UHP VSAT platform is based on many innovation technologies. It was developed using long-term experience in
satellite service provisioning. Nowadays electronics achievements made it possible to make VSAT platform
compact and assure its efficiency and reach functionality.
Figure 2 UHP-1100 Satellite Router Board
Technical characteristics are given in the appropriate product specification sheets. The UHP-1100 board
is fully compatible with other UHP-1000 routers.
1.2
Measurement equipment, tools and accessories
Standard computer (notebook) is required to configure and monitor status of UHP-1100 satellite router. The
computer must be equipped with a LAN interface and USB, and also have the following software installed:
Internet browser (WEB browser)
Telnet Client
The Terminal (e.g.: Hyperterminal, included in the OS Windows) (optional)
The router can be accessed via LAN or USB ports. Standard USB AM/BM cable (not supplied) is required for
connection to USB “Console” port of the satellite router.
PWL-2c Power Input
External LEDs indicators output
SCPC Rx
DC Input
LAN
TDMA Rx
Console
Reset
Tx
