CX6172/4
T
ABLE OF CONTENTS
45
10
FAQ
10.1
Door handle does not come to rest position
If the electronic door handle does not come to horizontal resting position by itself
after being assembled, it may be due to the fact that the lock is not aligned
properly. This can be corrected by increasing the hole diameter from 8 to 8.5
mm for mounting the door handle. The door handle can be mounted without any
stresses.
10.2
Door does not open even though the motor is running
If the motor of the electronic door handle moves audibly when an authorised
transponder is held up, but does not engage, then the position of both the door
handles with respect to the lock casing has to be checked in resting position. Both
the door handles have to be at 90° ± 1° with respect to the lock casing.
