Ugin e.ON 200 NEO, Instructions For Use Manual

Page: 9 / 33

Instruction for use (rev 141119) e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
9
3.2. CONDITIONS OF USE, TRANSPORT AND STORAGE

Authorised conditions of use
-
Ambient temperature: +5°C to +40°C
- Humidity range: maximum relative humidity 80% for temperatures until 31°C, without condensation
and decrease linear until 50% to 40°C, without condensation
- Ambient pressure: up to an altitude of 2000 m above sea level

Authorised conditions of storage
-
Ambient temperature: -20°C to +65°C
- Humidity range: maximum relative humidity 80%
- Ambient pressure: up to an altitude of 2000 m above sea level

Conditions to transport
-
Wait the complete cooling before packing/transporting
- Use the original packaging only, with the protective elements (polystyrene...)
- Take hold the furnace by its base, never lift by upper part of furnace
- Install the furnace in the packaging with the protective elements. Also protect the accessories for
transportation
3.3. ACCESSORIES

Accessories delivered with the furnace (included in the packaging):
eON 250 NEO UGIN code eON 200 NEO UGIN code
- 1 support pressing FCE05THE0058 - 1 firing base FCE05THE0057
- 1 firing base FCE05THE0057 - 1 tweezers INS03DBT0026
- 3 alumina pistons Ø 13 FCE05THE0061 - 1 USB-stick FCE05ELQ0070
- 1 cylinder set Ø 35 (100g) CYL03ACH0003 - 1 power cable FCE05ELC0014
- 1 cylinder set Ø 50 (200g) CYL03ACH0004
- 1 casting ring set No.2 (with alumina
piston D13mm)
FCE06BAG0004
- 1 casting ring set No.3 (with alumina
piston D13mm)
FCE06BAG0005
- 1 casting ring (Ø 81) FCE05DIV0052
- 1 silicone cylinder (Ø 80) CYL03FCE0002
- 1 cylinder base E max Ø 35 (100g) FCE05DIV0083
- 1 cylinder base E max Ø 50 (200g) FCE05DIV0084
- 1 hook kit FCE05TOL0117
- 1 firing tongs FCE05DIV0080
- 1 tweezers INS03DBT0026
- 1 USB-stick FCE05ELQ0070
- 1 power cable FCE05ELC0014
- 1 PU hose Ø4/6 FCE05PNE0015

Accessory recommended (not delivered with the furnace – to order separately)
-
Vacuum pump - UGIN DENTAIRE code: FCE01PPE0001