Instruction for use (rev 141119)
e.ON 200 NEO / e.ON 250 NEO
UGIN DENTAIRE
5
B.
INSTRUCTIONS FOR USE
1.
SAFETY INSTRUCTIONS
1.1.
USE
e.ON 200 NEO is a ceramic firing furnace and e.ON 250 NEO is a ceramic firing and pressing furnace. These
furnace are intended to firing the ceramic dental prostheses with or without pressing (according to
furnace model).
These furnaces have to be operated only by dental professionals.
e.ON 200 NEO and e.ON 250 NEO have to use in the conditions and for the uses described in this manual.
Any other use that will be made of it (such as firing other materials, heating food products, etc.) is
considered inappropriate. In this case, the manufacturer declines all liability and immediately cancels the
equipment warranty.
According to the product’s instructions and functionalities, it is imperative to read carefully the
instructions for use before furnace installation and use. Retain the manual for future reference.
1.2.
SAFETY INSTRUCTIONS
Pictograms’ meaning used in this instructions for use:
General warning
Electrical hazard
Burn hazard - Hot surface
Observe following safety instructions:
-
During operation and after use, the furnace head surface, tray, support pressing, firing base
may reach high temperatures: do not touch
-
Wear suitable gloves and the tweezer (delivered in accessories) for handling prosthetic
objects and support pressing/firing base
-
The unit has to be connected to an electrical installation in accordance with the applicable
standard in the country in which it is being used. This installation has to provide protection
against overcurrent, overload and ground faults
-
This furnace requires its own power line and has to be connected to a circuit breaker
-
Connect it directly to the mains socket. Do not use multiple sockets
-
Ensure that the connection cables are in perfect condition to prevent short circuits
-
Before any technical intervention, the unit has to be switched off (with the breaker) and
disconnected from the mains power supply
-
Do not spill liquid on the ventilation openings or inside the furnace
Summary of Contents for e.ON 200 NEO
Page 2: ......
