REAR
PANEL
CONTROLS
The left hand display shows a rotating line when DMX data is received.
STANDALONE
MASTER
MODE
In this mode the light source (set to Master) can be used in two ways – either as a single
independent light source or in a Master/Slave configuration with several light sources connected
together using DMX cables. The Slave (set to DMX) will mimic whatever standalone
programme the Master light source is set to. All menu functions are available in Master mode.
Note:
For Master/Slave to operate, both master & slave units must be set to address 001 only.
STANDALONE
REMOTE
MODE
Again in this mode the light source (set to Remote) can be used in two ways – either as a single
independent light source or in a Master/Slave configuration with several light sources connected
together using DMX cables. The Master colour sequences are controlled by a RF remote control
and again the Slave will mimic the Master light source.
DMX
MODE
In this mode the light source (set to DMX) can be controlled either by another Nova in Master
mode or by a DMX controller.
OPERATION
5
UFO
LIGHTING
