UES perfectMelt, Manual

Page: 23 / 61

UES AG · Breuershofstr. 48 · 47807 Krefeld · Germany
Tel.: 0049-2151-72950 · Fax: 0049-2151-729578 · info@ues-ag.net · www.ues-ag.net
23
Service
Menu item Setting Description Standard values
Sensor type NI120/PT100/NTC/FeCu Selection of the sensor type
of the channels NI120
Max. temperature
[°C] 0-195 °C
(0-250 °C
high temperature unit)
Max. permissible heating
temperature 195 °C
Max. over-
temperature [°C]
0-210 °C
(0-270 °C
high temperature unit)
highest permissible
temperature before the
alarm sounds 210 °C
Warning temperature
[°C] -8 / +10 Deviation from the target
value 10
Temperature of the
system °C / °F Setting Celsius or
Fahrenheit °C
Start hose [%] 0-100 Engagement of the hose
heater to X% of the tank
temperature 80
Start head [%] 0-100 Engagement of the head
heater to X% of the hose
temperature 80
Maintenance date xx:xx:xxxx next maintenance C 0,5 year
Maintenance time 0-4000 Operating hour meter until
the next maintenance 2000
Alarm memory 0-99 99 Alarm messages
Operating times Tank - Hoses - Heads Operating hour meter of the
connected channels
PW7873
CPU Temperature
[°C] 0-65 current CPU temperature 30 °C
Software version 1.0 Software Update PW2401
Temperature
difference -30 / +30 difference between tank
and manifold/ pump
*1
0 °C
Password Temp.
Parameter 1507 Protects the temperature
settings Off
Password Service 7873 Protects the service
settings On
Alarm/ Ready display On / Off Turning off the entire
screen display
Green / Red
On
Activate format On / Off activate/deactivate the
format setting On
Quantity channel
boards 1-4 activate/deactivate the
channel boards 1
Tank 2
Heating lower limit -10 - (-99) Setting the negative
temperature difference for
T2 without losing the Ready
signal
*2
-10
Tank 2
Heating upper limit
8
– 99
Setting the positive
temperature difference for
T2 without losing the Ready
signal
*2
8