VISION
UDOO VISION User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: A.R. - Reviewed by M.B. Copyright © 2021 SECO S.p.A
24
3.1
Introduction
On UDOO VISION board, there are several connectors located on the upper plane. Standard connectors are placed on the same side of PCB, so that it is possible
to place them on a panel of an eventual enclosure.
TOP SIDE
BOTTOM SIDE
Please be aware that, depending on the configuration purchased, the appearance of the board could be slightly different from the following pictures.
SATA 7p
Power
connector
+
Dual USB
3.0 type-A
GbE #2
GbE #1
SATA Power
Dual USB
2.0 header
COM Port
header
Button /
Switch header
TRSS Audio
socket
Arduino
Header
Reset
switch
M.2 Key B
Socket
GPIO
Header
Cabled Coin
Cell Battery
3-Wire FAN
eDP
microSD /
microSIM
M.2 Key E
Socket
Recovery
switch
