UDO Super 6 — Owner’s Manual
78
The left half of the performance control section.
DDS:
This fader allows you to adjust the modulation depth at which LFO 2
will affect the oscillators’ pitch. The toggle switch to the right of this fader
determines which oscillators are going to be affected by pitch modulation.
The oscillator select toggle switch allows you to select one of three options:
• DDS 1: With DDS 1 selected, only the pitch of the first oscillator will be
affected by LFO 2.
• 1 + 2:
With this option selected, the pitch of both oscillators will be
affected by LFO 2.
• DDS 2:
With DDS 2 selected, only the pitch of the second oscillator will
be affected by LFO 2.
VCF:
This fader allows you to adjust the modulation depth at which LFO 2
will affect the filter cutoff frequency.
The leftmost toggle switch in the performance control section determines
how LFO 2 modulations will be triggered:
• TRIG:
With this option selected, moving the bender upwards will cause
the sound to be modulated as set by the LFO 2 rotary controls and the
DDS
and
VCF
faders.
• AT + TRIG:
With this option selected, both aftertouch and the vertical
bender movement will cause the sound to be modulated as set by
the LFO 2 rotary controls and the
DDS
and
VCF
faders. If you use the
bender and apply pressure via the keyboard at the same time, only the
gesture with the greater effect on triggering the modulation will control
the intensity of the modulation.
• ON (AT -> BEND): With this option selected, LFO 2 will affect the
sound without any trigger impulse, as it will essentially be ‘on’ all the
time. In addition, aftertouch is now set to trigger the same modulations
that are controlled by horizontal bender movements.
Summary of Contents for SUPER 6
Page 142: ......