SlatStrip
Assembly Instructions
General Note:
It is the responsibility of the purchaser and/or installer to verify that the mounting surface is solid and capable of supporting the intended weight of
display. It is recommended to consult with a professional and determine the appropriate fastener/anchor needed for the mounting surface. UDIZINE is solely responsible
for the quality of its products and not accountable for faulty installation and ill use of its products beyond recommended limitations.
WWW.UDIZINE.COM
Maximum Weight Load (lbs)
24”
44”
Shelf
Hanging Rail
22”
22”
44”
The maximum weight load is based on an evenly distributed weight load between 2 points
The maximum weight load for regular glass is approximately 1/4 of tempered glass
Item #:
SW196SP
SW1107SP
Length:
47”
91”
# of Slits:
17
32
Max Weigh Load*
Per Strip:
260lbs
520lbs
Per Slit:
88lbs
88lbs
Page 1 of 3
Level
Phillips Screw Driver
Screwdriver
Please Note:
For mounting on sheet rock/drywall, we recommend using 3/16” Molly Bolts
or Toggle Bolts. Tools and mounting hardware are not provided
Molly Bolts
Toggle Bolts
Recommended Hardware
*The weight refers to the
SlatStrip’s ability to support
a certain weight load. The
final result depends on
the type of wall, anchor,
hardware and installation.
Metal SlatStrip
Metal SlatStrip
L - Shelf/Bar Width
24”
36”
48”
Distance Between Supports (Ls)
Shelf Type
Thickness
20”
22”
22”
24”
32”
22”
24”
36”
Tempered
Glass
1/4”
42
66
66
66
22
99
44
22
5/16”
70
38
38
3/8”
80*
85
85
MDF
3/4”
30
40
40
40
18
50
25
18
Hanging Bar
77
120
60
31
66
2”
2 3/4”
11”
2 3/4”
SW196SP
SW1107SP
